Reloading 410 slugs
WARNING: The information described on this page is for amusement only! Actually doing any of the following is dangerous to life and limb. The data on this page has NOT been tested in an instrumented test barrel and thus I have no real idea how much pressure the loads are producing. These loads could damage or destroy your firearm and possible even damage or kill yourself.

YOU HAVE BEEN WARNED!
There are three pages with differnt loads and data associated with them
Data Set 1 This is the original loads I worked up for the 80gr, 90gr, and 127gr slug I received from Buck, Ball, and slug.
Data Set 2 This is new data for the same three 80gr, 90gr, and 127gr slug I received from Buck, Ball, and slug. This time I change the way the load was put together and did a load for three inch hulls.
Data Set 3 This set of data is from a few years ago when I acquired some slugs from a website called Doug's Slugs.
Data Set 4 This set of data is for a very heavy 163gr 410 slug.
Data Set 5 This set of data is for the 90gr and 127gr slugs from Data Set 1 & 2 utilizing an attached UHMW-polyethylene bases to help improve accuracy.
Data Set 6 This set of data is for a second attempt to load the heavy 163gr 410 slugs utilizing an attached UHMW-polyethylene bases.
Data Set 7 This set of data is for a 113gr foster slug utilizing an attached UHMW-polyethylene bases.
Data Set 8 This set of data is for 127gr slugs with attached UHMW-polyethylene bases and utilizing a new powder different than previous tests.
Click here to return to index